Chocolate Marshmallow Poke Cake with Hot Cocoa Frosting
When the boiling water hits the cocoa batter, it looks thinner than a cake batter ought to be. Resist the urge to add more flour. That loose mixture bakes into…
Tip: save now, cook later.When the boiling water hits the cocoa batter, it looks thinner than a cake batter ought to be. Resist the urge to add more flour. That loose mixture bakes into a soft chocolate cake with plenty of room for the marshmallow filling to settle into every poke. This chocolate marshmallow poke cake with hot cocoa frosting is made in one 9×13-inch pan, so the filling and frosting stay right where you want them.
I like the contrast here: a dark, tender cake, a sweet marshmallow layer, and frosting that tastes like a mug of hot cocoa. The holes need to be deep enough for the filling but not so wide that the cake breaks apart, and the marshmallow creme needs just a little gentle warming to become pourable. Once the cake is chilled, each slice holds its layers and still feels soft under the fork.

Kitchen Note
Use the rounded handle of a wooden spoon, not a sharp knife, to poke the cake. The round holes give the warm filling a clear path down without leaving ragged edges that crumble when you frost and slice it.
Save this chocolate marshmallow poke cake for a cocoa-rich dessert with a soft marshmallow center and hot cocoa frosting.
Why This Chocolate Batter Looks Too Thin to Be Right
After the eggs, milk, oil, and vanilla are beaten into the dry ingredients, boiling water goes in last. The batter turns smooth and noticeably thin; that’s expected, not a sign that the flour was measured wrong. Adding extra flour to thicken it changes the balance and can leave the baked cake heavy instead of tender.
That thin consistency also matters once the cake is in the pan. It spreads evenly without needing to be pressed into the corners, and the cake bakes into a crumb that can take the marshmallow filling without turning dry. The toothpick cue is a few moist crumbs in the center, rather than a completely clean pick. A clean pick can mean you’ve baked away some of the softness this dessert needs.
Keep the pan level as you slide it into the oven so the batter stays evenly distributed. If the top looks set but the center still gives a wet streak on the toothpick, give it a little more oven time and check again; moist crumbs are the point, raw batter isn’t.
What Makes the Marshmallow Filling and Cocoa Frosting Work

- Unsweetened cocoa powder — This gives the cake its chocolate depth without adding sugar. Use ordinary unsweetened cocoa powder rather than hot cocoa mix, which is sweetened and includes other ingredients; the inexpensive baking cocoa works well here.
- Boiling water — It loosens the batter and helps the cocoa blend smoothly into it. Add it carefully and stir until there are no dark streaks or dry pockets; cold water won’t create the same smooth, thin batter.
- Neutral oil — Oil keeps the cake soft even after it has been chilled. A neutral vegetable oil is a good choice because it won’t compete with the chocolate; strongly flavored oils would change the taste.
- Marshmallow creme — This melts into a smooth, sweet filling when warmed with half-and-half. Use marshmallow creme rather than trying to melt marshmallows into the same mixture; the creme pours into the holes more evenly.
- Regular sweetened hot cocoa mix — It gives the frosting its familiar cocoa-and-sugar taste and contributes sweetness as well as chocolate flavor. Choose a regular sweetened mix, not an unsweetened cocoa powder, which would make the frosting less sweet and change its texture.
- Softened butter and heavy cream — Soft butter beats into a creamy base, while heavy cream helps the powdered sugar and cocoa mix turn fluffy and spreadable. Let the butter soften before mixing; cold butter can leave small lumps in the finished frosting.
From Thin Batter to a Filled, Frosted Cake
Mix the Cocoa Batter Without Thickening It
Heat the oven to 350°F and coat a 9×13-inch baking pan with nonstick cooking spray. Whisk the flour, sugar, cocoa powder, baking powder, baking soda, and salt in a large bowl so the leaveners are evenly distributed. Add the eggs, milk, oil, and vanilla, then beat with a hand mixer on medium speed for 2 minutes. Carefully stir in the boiling water until the batter is smooth and thin, then pour it into the pan.
Bake Until the Center Leaves Moist Crumbs
Bake the cake for 30–35 minutes, checking the center with a toothpick. A few moist crumbs should cling to it; a streak of liquid batter means it needs longer. Avoid waiting for the toothpick to come out completely dry, since the cake continues to settle as it cools. Set the pan on a rack and let the cake cool in the pan for 10 minutes.
Fill the Holes While the Cake Is Warm
After the 10-minute rest, poke holes about 1 inch apart with the rounded handle of a wooden spoon. Warm the marshmallow creme and half-and-half in a small saucepan over low heat, stirring until smooth and pourable, about 2–3 minutes. Pour it slowly over the warm cake and aim for the holes; if you pour too quickly, more filling will stay on the surface instead of traveling down. Let the cake cool completely in the pan before frosting.
Beat and Spread the Hot Cocoa Frosting
Beat the softened butter with a hand mixer on medium speed until creamy. Add the powdered sugar, hot cocoa mix, and heavy cream, then beat on low until combined so the dry ingredients don’t puff out of the bowl. Increase to medium and beat until fluffy and spreadable, about 2 minutes. Spread the frosting over the cooled cake, cover it, and refrigerate for at least 1 hour before serving.
Easy Flavor Changes That Keep the Cake’s Layers
Make the Cake Gluten-Free
Replace the all-purpose flour with a measure-for-measure gluten-free baking blend that includes xanthan gum, using the same amount. The crumb may be a little more delicate, so let the cake cool completely before spreading on the frosting and cutting it.
Give the Frosting a Peppermint Cocoa Note
Use a sweetened peppermint hot cocoa mix in place of the regular hot cocoa mix, keeping the amount the same. The frosting will have a cool mint note alongside the chocolate; choose a mix you enjoy drinking so its sweetness and mint strength suit the cake.
Use Buttermilk for a Tangier Cake
Swap the whole milk for the same amount of buttermilk. The cake gets a gentle tang that balances the sweet filling and frosting, with a slightly more tender crumb.
Storage and Reheating
- Refrigerator: Cover the cake and refrigerate it for 3–4 days. The frosting will firm up when cold, while the cake stays soft.
- Freezer: Freeze individual slices in airtight wrapping for up to 2 months. Thaw them overnight in the refrigerator; the marshmallow layer may be a little less smooth after thawing.
- Reheating: This cake is best served chilled or straight from the refrigerator, so it doesn’t need reheating. Don’t warm the whole frosted cake, which can soften the frosting unevenly.
Questions That Come Up When Making This Poke Cake

Chocolate Marshmallow Poke Cake with Hot Cocoa Frosting
Ingredients
Equipment
Method
- Heat the oven to 350°F and coat a 9x13-inch baking pan with nonstick cooking spray.
- Whisk the all-purpose flour, granulated sugar, unsweetened cocoa powder, baking powder, baking soda, and salt together in a large bowl.
- Add the eggs, whole milk, neutral oil, and vanilla extract, then beat with a hand mixer on medium speed for 2 minutes.
- Carefully stir in the boiling water until the batter is smooth and thin.
- Pour the batter into the prepared pan.
- Bake for 30–35 minutes, until a toothpick inserted in the center comes out with a few moist crumbs.
- Cool the cake in the pan for 10 minutes.
- Poke holes about 1 inch apart using the rounded handle of a wooden spoon.
- Warm the marshmallow creme and half-and-half in a small saucepan over low heat, stirring until smooth and pourable, about 2–3 minutes.
- Slowly pour the filling over the warm cake, aiming it into the holes.
- Cool the cake completely in the pan.
- Beat the softened unsalted butter in a large bowl with a hand mixer on medium speed until creamy.
- Add the powdered sugar, regular sweetened hot cocoa mix, and heavy cream, then beat on low until combined and on medium until fluffy and spreadable, about 2 minutes.
- Spread the frosting evenly over the cooled cake.
- Cover and refrigerate the cake for at least 1 hour before serving.